Engine collection Guide

You’re going to want to ensure you properly prepare an engine for transport. One of the main reasons for denial of damage claims is due to improper pallet preparation. There may also be further charges if engine fluids such as oil leak onto other packages. Here are some steps which should help you avoid these unnecessary situations when you send your engine via pallet delivery.

Step 1 Drain All Fluids

It’s really important that you drain all of the fluids in the engine before sending it off. Every component needs to be drained of all liquids, including water. This may be tested by a driver and if oil is discovered they can choose not to take it, with a surcharge being applied.

Step 2 Prevent leakage

When you pack the engine, make sure it's wrapped in something absorbent, like a carpet.

Step 3 Position

Make sure that it is positioned centrally in the pallet. This is to stop it tipping to either side. We recommend you allow three inches excess all the way around, on each side. It prevents overhanging and stops the good from moving around.

Step 4 Stabilise

Ensure the side of the engine with the largest surface area is making contact with the pallet. Securely strap the engine to the pallet, this will prevent the engine from moving around during transit. Try to use ratchet straps, or steel banding. Non slip material can also help when utilized with two straps secured on top. The non slip can keep the engine secure.

Speedshift | Engine Collection Service call 0845 519 0270